Job description designer
(Design engineer in construction)

APPROVE
CEO
________________
"________"_____________ ____ G.

1. General Provisions

1.1. The designer belongs to the category of specialists.
1.2. The designer is appointed to the position and dismissed from it by order of the head of the enterprise.
1.3. The designer reports directly to the head of the enterprise, the chief architect of the project, the head of the department, or another person.
1.4. During the absence of the designer, his rights and obligations are performed by a person appointed in the prescribed manner.
1.5. For the position:
- the designer is appointed by a person with a higher professional education, without presenting requirements for work experience, or secondary professional education and experience in design organizations at least 5 years;
- a designer in category III construction is appointed a person with a higher professional education and experience in design organizations;
- a designer in the construction of the II category is appointed by a person with a higher professional education and work experience in engineering and technical positions, replaced by specialists with a higher professional education, for at least 2 years;
- a designer in the construction of category I is appointed a person who has a higher professional education and work experience as a design engineer of category II for at least 2 years.
1.6. The designer must know:
- legislative and regulatory legal acts, administrative and
regulatory materials for design, construction and operation
objects;
- standards, specifications and other guidance materials for the development and execution of design estimates;
- profile, specialization and features of the structure of the organization;
- methods of designing and carrying out technical and economic calculations;
- technology of construction works;
- technology of manufacturing and installation of building structures;
- types and properties of building materials;
- technical means of design and construction;
- Fundamentals of patent science;
- best practices in design and construction;
- technical, economic, environmental and social requirements
to the designed objects;
- fundamentals of economics, scientific organization of labor, regulation, organization of production and management;
- basics of labor legislation;
- internal labor regulations;
- rules and norms of labor protection, safety measures, industrial sanitation and fire protection.
1.7. The designer is guided in his activities by:
- legislative acts RF;
- the Charter of the enterprise, the Internal Labor Regulations, other regulatory acts of the company;
- orders and directives of the management;
- this job description.

2. Job responsibilities of the designer

The designer performs the following job responsibilities:

2.1. Based on the latest scientific and technological achievements, advanced domestic and foreign experience in design, construction and operation of facilities and using design automation tools, develops separate sections (parts) of the project.
2.2. Participates in the preparation of assignments for the development of design solutions.
2.3. Participates in the collection of initial data for design, in the decision technical issues for assigned facilities throughout the entire period of design, construction, commissioning of the facility and development of design capacities.
2.4. Links the adopted design decisions with design decisions for other sections (parts) of the project.
2.5. Conducts patent research to ensure the patent purity of new design solutions and patentability. 2.6. Ensures compliance of developed projects and technical documentation standards, specifications and other regulatory documents for design and construction, as well as the assignment for their development. 2.7. Carries out architectural supervision of the construction of the designed objects, consults on issues within his competence. 2.8. Participates in the analysis and generalization of the experience of developing projects and their implementation in construction and, on this basis, prepares proposals on the advisability of adjusting the adopted general and fundamental design decisions.
2.9. Participates in the preparation of applications for inventions, preparation of opinions and reviews on rationalization proposals and inventions, draft standards, specifications and others normative documents, in seminars and conferences. 2.10. Performs individual official assignments of his immediate supervisor.

3. Rights of the designer

The designer has the right:

3.1. Give instructions that are binding on employees.
3.2. Conduct quality checks and timeliness of execution of instructions.
3.3. Get acquainted with the draft decisions of the enterprise management regarding its activities.
3.4. Submit proposals for the management to improve the work related to the responsibilities provided for in this instruction.
3.5. Within the limits of its competence, report to the immediate supervisor about all the shortcomings identified in the course of activities and make proposals for their elimination.
3.6. Involve specialists from all structural divisions with the permission of the management to solve the tasks assigned to him.
3.7. Request personally or on behalf of the management of the enterprise from the heads of structural divisions and specialists information and documents necessary for the performance of official duties.
3.8. Require management to assist in the performance of their duties.

4. Responsibility of the designer

The designer is responsible for:

4.1. Improper performance or non-performance of their official duties provided for by this job description - to the extent determined by the current labor legislation of the Russian Federation.
4.2. Offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation Russian Federation. 4.3. Causing material damage - within the limits determined by the current labor and civil legislation of the Russian Federation.
4.4. Disclosure of trade secrets of the enterprise.

Job description of a design engineer[name of organization, enterprise, etc.]

This job description has been developed and approved in accordance with the provisions and other regulations governing labor relations in the Russian Federation.

I. General provisions

1.1. The design engineer belongs to the category of specialists. Appointed and dismissed by order of the director of the enterprise.

1.2. For the position:

A design engineer is appointed by a person who has a higher professional education without presenting requirements for work experience, or a secondary vocational education and work experience in design organizations for at least [value] years;

Category III design engineer - a person with a higher professional education and work experience in design organizations;

Category II design engineer - a person with a higher professional education and work experience in engineering and technical positions filled by specialists with a higher professional education, not less than [value] years;

Category I design engineer - a person who has a higher professional education and at least [value] years as a category II design engineer.

1.3. The Design Engineer reports directly to [insert as appropriate].

1.4. The design engineer must know:

Methods for designing and conducting technical and economic calculations;

Principles of operation, manufacturing and installation technologies for equipment and structures, types and properties of materials;

Decrees, orders, orders of higher and other bodies, methodological and normative materials for the design, construction and operation of facilities;

Standards, specifications and other guidance materials for the development and execution of design and estimate documentation;

Technical means of design and construction;

Fundamentals of patent science;

Advanced domestic and foreign experience in design and construction;

Technical, economic and social requirements for the designed facilities;

Organization of labor and production;

Rules and norms of labor protection;

- [fill in as needed].

II. Job Responsibilities

Design engineer:

2.1. On the basis of the latest scientific and technical achievements of advanced domestic and foreign experience in the design, construction and operation of facilities and the use of design automation tools, develops separate sections (parts) of the project.

2.2. Participates in the preparation of assignments for the development of design solutions.

2.3. Participates in the collection of initial data for design, in solving technical issues for assigned facilities throughout the entire period of construction design, commissioning of the facility and release of design capacities.

2.4. Links the adopted design decisions with design decisions for other sections (parts of the project).

2.5. Conducts patent research to ensure the patent purity of new design solutions and patentability.

2.6. Ensures the compliance of developed projects and technical documentation with standards, specifications and other regulatory documents for design and construction, as well as the task for their development.

2.8. Participates in the analysis and generalization of the experience of developing projects and their implementation in construction and, on this basis, prepares proposals on the advisability of adjusting the adopted general and fundamental design decisions.

2.9. Participates in the preparation of applications for inventions, the preparation of conclusions and reviews on rationalization proposals, draft standards, specifications and other regulatory documents, in the work of seminars and conferences.

2.10. [Enter as required].

III. Rights

The design engineer has the right to:

3.1. Get acquainted with the draft decisions of the management of the enterprise relating to its activities.

3.2. Submit proposals for improvement of the work related to the responsibilities provided for in this instruction for consideration by the management.

3.3. Within the limits of his competence, report to his immediate supervisor about all the shortcomings identified in the course of his activities, and make proposals for their elimination.

3.4. Request personally or on behalf of the management of the enterprise from the divisions of the enterprise and specialists information and documents necessary for the performance of their duties.

3.5. Involve specialists from all (separate) structural divisions of the enterprise in solving the tasks assigned to it (if it is provided for by the regulations on structural divisions, if not, with the permission of the head of the enterprise).

3.6. Require the management of the enterprise to assist in the performance of their duties and rights.

3.7. [Enter as required].

IV. Responsibility

The design engineer is responsible for:

4.1. For improper performance or non-performance of their official duties provided for by this job description - to the extent determined by the labor legislation of the Russian Federation.

4.2. For offenses committed in the course of carrying out their activities - within the limits determined by the administrative, criminal and civil legislation of the Russian Federation.

4.3. For causing material damage - within the limits determined by the labor and civil legislation of the Russian Federation.

The job description was developed in accordance with [name, number and date of the document].

Head of structural unit

[initials, last name]

[signature]

[day month Year]

Agreed:

Head of the legal department

[initials, last name]

[signature]

[day month Year]

Familiarized with the instructions:

[initials, last name]

[signature]

[day month Year]

Makes a selection of typical industrial products and structures according to the current catalogs, as well as units according to the current series instead of those excluded from standard projects,

Calculates the compliance of the heat transfer resistance of enclosing structures with regulatory requirements and, if necessary, makes changes to the standard design solution.

2. Draws up a general explanatory note to the working projects (projects) developed in the group and calculates the TEP given in it.

3. Produces the development of a set of drawings of the section "Construction organization project".

Chief engineer - head of technical department K.K. Podkopayevsky

Appendix 2

JOB DUTIES

VC system design engineerIIIcategories

1. Determines the design schemes and methods for calculating water supply and sewerage systems, process water supply, selects the equipment of systems, routing, pipelines in the development of buildings and structures of the III category of complexity.

2. Based on the calculation data, an engineer of the highest category develops drawings:

Plans, sections, schemes, pumping units of systems of individual designed buildings and structures of the IV category of complexity;

Tracing of water supply and sewer networks on the master plans of quarters and rural settlements,

Installation drawings of installations,

overfall wells,

Details of water wells and chambers,

Blowers.

3. Develops drawings of plans, sections of diagrams, installations of systems of buildings and structures standard projects instead of the drawings excluded when linking.

Pumping stations - treatment facilities, residential and civil buildings,

Buildings and structures of the IV category of complexity with the performance of the necessary calculations.

5. Makes calculations:

Water consumption and water disposal of water supply and sewerage systems of buildings and structures of V and more complexity categories,

Hydraulic calculation of pipelines of dead-end water supply networks and street collectors.

6. Draws up the relevant sections of the general explanatory notes to the working projects (projects) developed in the group and calculates the TEP given in it.

7. Produces the development of water supply and sewerage systems of the "Construction Organization Project".

Appendix 3

JOB DUTIES

design engineer TGB category III

1. Defines design schemes and calculation methods for heating, ventilation, process heat supply systems, selects ventilation and heating equipment, silencers and other elements of systems, routes air ducts and pipelines, arranges ventilation chambers in the development of buildings and structures up to category III of complexity according to TNViR 4.3. Table 27, 4.2. table 38.

2. Based on these calculations, an engineer of the highest category develops drawings:

Boiler rooms with heat carriers steam pressure up to 0.9 MPa, water temperature up to 115°C,

heating points,

gas distribution plants,

Plans, sections, diagrams, installations of systems are individually designed: buildings and structures up to category III of complexity on the instructions of an engineer of the highest category.

3. Develops drawings of plans, sections, diagrams, installations-systems of buildings and structures of standard projects, instead of those excluded when linking drawings.

4. Carries out the binding of standard projects:

Boiler rooms with heat carrier parameters steam pressure over 0.9 MPa and water temperature over 115°C, gas distribution points, group tank installations with the performance of the necessary calculations and the development of drawings to replace the excluded ones;

Buildings and structures up to the III category of complexity with the performance of the necessary calculations.

5. Makes calculations:

Air exchanges, heating devices of heating systems, pipelines, air ducts of buildings and structures of the IV category of complexity,

Hydraulic calculations of pipelines of dead-end networks of heat and gas supply systems,

By determining the loads on the supports of pipelines of heat and gas networks.

6. Signs the developed documentation.

7. Uses in the design of mechanization tools for design automation, progressive design tools and technological processes, including TECs and drawings-blanks.

Chief engineer - head of technical department K.K. Podkopayevsky

Appendix 4

JOB RESPONSIBILITIES

electrical design engineerIIIcategories

1. Develop drawings:

power plans,

Plans of power and lighting electrical networks,

Performs design schemes of simple objects,

Plans for low-voltage networks and fire alarm at the direction of the group leader.

2. Carries out the binding of standard projects of buildings and structures without changing their space-planning decisions.

When linking standard projects:

Performs lighting checks in accordance with current regulations,

Replacement of discontinued equipment and materials,

Linking protective measures (zeroing),

Resolves issues of fire and burglar alarms on the instructions of the head of the group,

Makes changes to electrical circuits on the instructions of the head of the sector (group).

Chief engineer - head of technical department K.K. Podkopayevsky

Appendix 5

JOB DUTIES

3rd category cost estimate engineer

1. Compiles summary estimates

2. Makes object estimates

3. Compiles local estimates using standard estimates or estimates of analogues.

4. Owns the methods of issuing estimates on a PC.

5. Compile bills of materials.

6. Calculates the amount of work according to the drawings.

Chief engineer - head of technical department K.K. Podkopayevsky

I. General provisions

1.1. This job description defines the functional duties, rights and responsibilities of the lead engineer - designer of the design and estimate department (PSO) of ______________ OJSC.

1.2. The lead design engineer is appointed to the position and dismissed by order CEO JSC "______________" on the proposal of the head of the design and estimate department.

1.3. The Leading Design Engineer reports directly to the Head of the PSO JSC "_______________".

1.4. A person with a higher or secondary vocational education and at least 5 years of work experience in the specialty in engineering and technical positions is appointed to the position of lead design engineer.

1.5. The lead design engineer is the responsible executor of the development of the gas section project documentation for new construction overhaul, expansion and reconstruction of existing enterprises, buildings and structures.

1.6. Before being admitted to work, the lead design engineer must:

Pass the examination of the commission for knowledge of the "Safety Rules PB 12-529-03, PB 12-609-03", SNiPs, SP and other applicable regulatory, technical and legal documents;

Pass an examination of knowledge of industrial safety requirements established in federal laws and other regulatory and legal acts of the Russian Federation;

Pass a test of knowledge of industrial safety requirements at gas supply facilities;

Pass a test of knowledge of labor protection requirements.

1.7. The lead design engineer must know and use in practical work:

Republican, departmental, guiding, methodological and regulatory materials for the design, construction and design of project documentation:

Systems and methods of design, engineering calculations;

Fundamentals of systems and means of computer-aided design and engineering calculations;

Fundamentals of design features of gas equipment;

Basics of labor legislation;

Rules and norms of labor protection, safety measures, industrial sanitation and fire protection in design and construction.

2. FUNCTIONAL RESPONSIBILITIES

2.1. Develops and draws up schemes (sketches) of gas supply for designed and reconstructed residential buildings, administrative and amenity premises, boiler houses, agricultural and industrial enterprises.

2.2. Develops design solutions for the construction of hydraulic fracturing, ShRP, GRU, GSHU.

2.3. Develops a section on the installation of tread installations to protect gas supply systems from corrosion.

2.4. Develops a section for the placement of individual, cabinet and gas-cylinder installations.

2.5. Solves the issues of placing gas appliances and gas meters in existing residential buildings.

2.6. Signs the documentation developed by him.

2.7. Coordinates projects developed in the group with specialists from related groups, representatives of the customer and supervisory authorities.

2.9. Uses in the design of the means of mechanization and automation of design, progressive technical means of designing technological processes.

3. Rights

3.1. Contact the GUI for technical advice.

3.2. Submit proposals to the PIU to change the decisions made by it, if these proposals are aimed at improving the performance of the project.

3.3 When changing tasks during the design process, raise a question with the Chief Executive Officer and the head of the department about revising the deadlines for the completion of work.

4. Responsibility

4.1. Compliance of the developed solutions with the design task, the task of the GUI, related departments, standards, building codes and rules, current catalogs of equipment, drawings of typical structures, products and components of buildings, the most economical ways of performing construction and installation works.

4.2. For the technical feasibility of personally developed design solutions, the correctness of the calculations performed, the completeness of text and graphic materials.

4.3. Compliance with the established deadlines for the implementation of work.

4.4. For the exhaustive use of the most rational ways of compiling and reproducing documentation.

4.5. For compliance with internal labor regulations.

4.6. For complying with the requirements of this job description.

5. WORKING CONDITIONS

5.1. The mode of operation of the lead design engineer is determined in accordance with the internal labor regulations established in the organization.

5.2. In connection with the production need, the design engineer may go on business trips (including local ones).

6. RIGHT OF SIGNATURE

6.1. To ensure his activities, the lead design engineer is given the right to sign documents on issues related to his present job description.

AGREED

Deputy General Director for

general questions ______________

Deputy general director for

construction and investment ______________

Head of project department _______________

Acquainted with the instruction: "___" _________ 2012. ________________

Job description of a design engineer in construction[name of organization, enterprise, etc.]

This job description has been developed and approved in accordance with the provisions and other regulations governing labor relations in the Russian Federation.

1. General Provisions

1.1. A design engineer in construction belongs to the category of specialists.

1.2. Appointment to the position of a design engineer in construction and dismissal from office is carried out by order (instruction) of the head of the organization.

1.3. For the position:

A design engineer in construction is appointed by a person with a higher professional education, without presenting requirements for work experience or secondary vocational education and work experience in design organizations for at least 5 years;

A design engineer in the construction of the III category is appointed by a person with a higher professional education and experience in design organizations; - a design engineer in the construction of the II category - a person with a higher professional education and work experience in engineering and technical positions, replaced by specialists with a higher professional education, for at least 2 years; - a design engineer in construction of category I is appointed a person who has a higher professional education and work experience as a design engineer of category II for at least 2 years.

1.4. The design engineer in construction must know:

Legislative and regulatory legal acts, administrative and regulatory materials for the design, construction and operation of facilities;

Standards, specifications and other guidance materials for the development and execution of design and estimate documentation;

Profile, specialization and features of the structure of the organization;

Methods for designing and conducting technical and economic calculations;

Technology of construction works;

Technology of manufacturing and installation of building structures;

Types and properties of building materials;

Technical means of design and construction;

Fundamentals of patent science;

Best practices in design and construction;

Technical, economic, environmental and social requirements for the designed facilities;

Fundamentals of economics, scientific organization of labor, regulation, organization of production and management;

Basics of labor legislation;

Rules and norms of labor protection, safety measures, industrial sanitation and fire protection;

- [fill in as needed].

1.5. In his activities, a design engineer in construction is guided by:

the charter of the organization;

this job description;

- [other documents].

1.6. The construction design engineer reports directly to the [chief project architect, other person].

1.7. During the absence of a design engineer in construction (business trip, vacation, illness, etc.), his duties are performed by an employee appointed in the prescribed manner, who acquires the appropriate rights and is responsible for non-performance or improper performance of the duties assigned to him in connection with the replacement .

1.8. [Enter as required].

2. Job responsibilities

The Structural Engineer has the following responsibilities:

2.1. Develops separate sections (parts) of the project.

2.2. Uses design automation tools.

2.3. Participates in the preparation of assignments for the development of design solutions.

2.4. Participates in the collection of initial data for design, in solving technical issues for assigned construction projects throughout the entire period of construction design, commissioning of the facility and development of design capacities.

2.5. Coordinates the adopted design decisions with design decisions for other sections (parts of the project).

2.6. Conducts patent research to ensure the patent purity of new design solutions and patentability.

2.7. Ensures the compliance of developed projects and technical documentation with standards, specifications and other regulatory documents for design and construction, as well as the task for their development.

2.8. Advises employees of the organization on issues within its competence.

2.9. Participates in the analysis and generalization of the experience of developing projects and their implementation in construction and, on this basis, prepares proposals on the advisability of adjusting the adopted general and fundamental design decisions.

2.10. Participates in the preparation of applications for inventions, the preparation of conclusions and reviews on rationalization proposals, draft standards, specifications and other regulatory documents, in the work of seminars and conferences.

2.11. Performs related duties.

2.12. [Enter as required].

3. Rights

The design engineer in construction has the right to:

3.1. Participate in the discussion of draft decisions of the head of the organization relating to his activities.

3.2. Request and receive from structural units, employees the necessary information, documents.

3.3. Sign and endorse documents within their competence.

3.4. Give instructions to be followed by employees.

3.5. Conduct quality and timeliness checks.

3.6. Participate in the discussion of issues related to their duties.

3.7. Require from your immediate supervisor to assist in the performance of their duties and rights.

3.8. [Other rights].

4. Responsibility

4.1. The construction engineer is responsible for:

For improper performance or non-performance of their official duties stipulated by this job description,

In the manner prescribed by the current labor legislation of the Russian Federation.

For offenses committed in the course of their activities,

In the manner prescribed by the current administrative, criminal and civil legislation of the Russian Federation;

For causing damage to the organization - in the manner prescribed by the current labor legislation of the Russian Federation.

4.2. [Enter as required].

The job description was developed in accordance with [name, number and date of the document].

Head of structural unit [initials, surname]

[signature]

[day month Year]

Agreed:

Head of Legal Department (lawyer) [initials, last name]

[signature]

[day month Year]

I am familiar with this job description: [initials, surname]

[signature]

[day month Year]